The Fusion360 project and G-CODE used from prints parts are available in file section too
NEW : project as .STEP file format available.
Some parts can be found here :
Conception :
Filter :
The filter box contain a 12v, 0.7A fan (from Server) + carbon filter + HEPA filter.
Both filters are cut to size
It powered by 12v adapter with switch ON/OFF button
| 1_equerre-L.gcode | 313.1KB | |
| 1_equerre_-_plate.gcode | 675.1KB | |
| 1_hinge.gcode | 1.2MB | |
| 1_hinge_raft.gcode | 1.3MB | |
| 4_equerre-L.gcode | 1.2MB | |
| 4_equerre_-_plate.gcode | 2.6MB | |
| alim__couvercle.gcode | 2.1MB | |
| caisson.f3d | 15.0MB | |
| caisson.step | 12.1MB | |
| equerre_-_L.stl | 89.0KB | |
| equerre_-_plate.stl | 117.5KB | |
| filtre_boite.stl | 94.4KB | |
| filtre_boitier.gcode | 7.0MB | |
| filtre_boitier.stl | 156.1KB | |
| filtre_couvercle-alim.stl | 40.7KB | |
| filtre_couvercle.gcode | 2.7MB | |
| filtre_couvercle.stl | 201.3KB | |
| filtre__boite.gcode | 18.3MB | |
| passe-filament.gcode | 1.6MB | |
| passe-filament_boulon.stl | 1.0MB | |
| passe-filament_ecrou.stl | 297.1KB | |
| poignee.gcode | 2.5MB | |
| poignee.stl | 2.0MB | |
| porte-filament.gcode | 6.2MB | |
| suport_filament-sensor.gcode | 1.6MB | |
| support_lock-pin.gcode | 126.8KB |
