Create a magnetic rubix cube like this one, but 3D print it instead! This works only on FDM/FFF printers because they allow you to pause on a layer, so you can drop in a magnet, then carry one printing over the top to encapsulate it within the cube!
| corner_01.stl | 212.6KB | |
| corner_02.stl | 212.6KB | |
| corner_03.stl | 212.6KB | |
| corner_04.stl | 212.6KB | |
| corner_05.stl | 212.6KB | |
| corner_06.stl | 212.6KB | |
| master_cube_01.stl | 333.1KB | |
| master_cube_02.stl | 333.1KB | |
| master_cube_03.stl | 333.1KB | |
| master_cube_04.stl | 333.1KB | |
| master_cube_05.stl | 333.1KB | |
| master_cube_06.stl | 333.1KB | |
| sidemid_01.stl | 250.5KB | |
| sidemid_02.stl | 250.5KB | |
| sidemid_03.stl | 250.5KB | |
| sidemid_04.stl | 250.5KB | |
| sidemid_05.stl | 250.5KB | |
| sidemid_06.stl | 250.5KB | |
| sidetop_01.stl | 220.0KB | |
| sidetop_02.stl | 220.0KB | |
| sidetop_03.stl | 220.0KB | |
| sidetop_04.stl | 220.0KB | |
| sidetop_05.stl | 220.0KB | |
| sidetop_06.stl | 220.0KB |
