Here are the files for a little handheld EMP gun. It isn't powerful enough to disrupt much more than a calculator. Here is a link to the high voltage converter I used: http://a.co/d/c3xGjZ5 . To make a battery holder I used screws and a piece of wire to connect the batteries in series on the bottom of the handle. I used a small 6mm momentary push-button. For the inductor on the end you can use double-sided tape to hold the wire in place as you wind it. The two screws midway down the gun are the spark gap. The inductor is in series with the spark-gap.DO NOT USE AROUND SENSITIVE ELECTRONICS, DO NOT TOUCH THE OUTPUT OF THE CONVERTER IT WILL HURT, MAKE AT YOUR OWN RISK, FOR EDUCATIONAL PURPOSES ONLY
Happy making!!!
| BATTERYCASETOP.stl | 80.9KB | |
| BATTERY_CASE.stl | 163.4KB |
