Emergency Stop Punch Button 3D Printer Model
The file 'Emergency Stop Punch Button 3D Printer Model' is (stl) file type, size is 6.6KB.
The file 'Emergency Stop Punch Button 3D Printer Model' is (stl) file type, size is 6.6KB.
Sometimes I feel the need to quickly power off my machine tools when working on it, and have installed a "remote" stop switch on the lathe that I grab and hold in the hand when making some critical operation. Just a press and the motor is dead.
My lathe and my milling machine have already latching emergency stop buttons, but sometimes, specially when working on the lathe, I want to stop the motor without move my body to reach the original commands and without have to keep the switch in my hand.
Besides, I did not wanted a latching switch, because to re-start the motor, I need to push the "on" button again, so there is no danger of an unexpected (and VERY dangerous) re-start.
So I have designed this small box with an articulated lid to fit a standard end-course switch.
The base received four 20 x 2 mm round neodymium magnets, that allows me to locate the switch near my hand (or even foot/knee). The switch stays in place without any glue.
Hope it is useful to someone !
| box.stl | 28.1KB | |
| lid.stl | 17.1KB |
