ELRS Antenna Tracker 3D Printer Model
The file 'ELRS Antenna Tracker 3D Printer Model' is (stl) file type, size is 1.8MB.
The file 'ELRS Antenna Tracker 3D Printer Model' is (stl) file type, size is 1.8MB.
Antenna tracker for heavy antennas or walksnail RX with bigger antennas. HDMI cable will fit through the center gear.
Electronic and software is optional. I use ESP23C3 with an ELRS receiver, the NEMA17 is controlled by an TMS2209 stepper driver.
Software is described by an github projects, see:
https://github.com/CopterFail/BleAntennaTracker
and
https://github.com/CopterFail/EDGETX-LUA-micro-antenna-tracker
| stativ_mount.stl | 148.3KB | |
| Tracker_basis1.stl | 774.5KB | |
| Tracker_basis2.stl | 68.2KB | |
| Tracker_basis3.stl | 21.2KB | |
| Tracker_platte.stl | 544.4KB | |
| Tracker_seite1.stl | 194.2KB | |
| Tracker_seite2.stl | 168.6KB | |
| Tracker_seite3.stl | 54.6KB | |
| Tracker_seite4.stl | 29.2KB | |
| Tracker_spacer.stl | 112.6KB | |
| Tracker_teil1.stl | 907.5KB | |
| Tracker_teil2.stl | 969.3KB | |
| Tracker_teil3.stl | 297.7KB | |
| Tracker_teil3b.stl | 103.2KB | |
| Tracker_teil4.stl | 692.9KB |
