This is an elephant face with separate eyes and tusks, that clips onto your faucet above the flexible or extending end which serves as the elephant's trunk.
The elephant fits a 1" diameter faucet and was designed for this flexible faucet extension: https://www.amazon.com/gp/product/B082DTLY2Q/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I included the Fusion 360 file for easier edits, if anyone needs to change the clip size.
The ElephantEyes.stl or ElephantTusks.stl have both the left and right sides on the correct sides of the print bed (facing the elephant) and are oriented properly.
The individual pieces are not necessary to print unless you need to adjust their orientation (they have not been pre-oriented for slicing)
The elephant face prints as oriented and will need supports touching the buildplate.
The tusks need supports and look better with a smaller layer height (I used 0.1 mm layer height). I recommend lightly filing or sanding them to be smoother.
I filled in the eyes with a thin black Sharpie to make the pupils.
| ElephantEyeOnTheLeft.stl | 50.3KB | |
| ElephantEyeOnTheRight.stl | 50.3KB | |
| ElephantEyes.stl | 98.7KB | |
| ElephantFace.stl | 1.0MB | |
| ElephantFaucetClip.f3d | 1.1MB | |
| ElephantTuskOnTheLeft.stl | 527.7KB | |
| ElephantTuskOnTheRight.stl | 526.3KB | |
| ElephantTusks.stl | 1.0MB |
