This is my first modification for the EleksMaker A3 Pro. I know there are already some cable supports on Thingiverse, but most of them I find clunky. On the other hand, I simply like to do things myself.

So this cable support is easy to print, easy to mount but provides all the strength to hold the cables in place. Furthermore, you can secure the cables with a zip tie and remove them without having to disassemble the construction.

Without this cable support, all the work of holding the cables above the work area is provided by the cable connecting to the laser module. This puts a lot of stress on the little connector and could damage this part in a short term.

Now you can unplug your laser module for e. g. maintenance purposes (like movement testing) without having loose cables hanging into your work area.

How this cable support is to assemble and how the result looks like you can see in the following video:

https://youtu.be/_2ki8ZPhLPE

Your opinion on this design and suggestions to make it even better is appreciated

If you are interested in buying this laser engraver, please consider using one of the following links. These are affiliate links. Using this links will not cost you anything but you help me creating more projects for you in the future.

GearBest: https://goo.gl/jEfY9J
Banggood: https://goo.gl/AZxgdB

Please also take a look at my other designs, printer parts, and tools.

If you like to support me and my work, please consider following me on:

• Thingiverse
• MartinMajewski.net
• Twitter
• Instagram
• YouTube

Sending a tip over Thingiverse is much appreciated and will provide me with coffee to stay productive.

Please also consider buying your next gear via one of the affiliate links found inside my Thingiverse project pages or directly over the following links.

• Amazon.de
• Amazon.co.uk
• eBay Germany
• GearBest.com