Elegoo Wash Station Mixer 3D Printer Model
The file 'Elegoo Wash Station Mixer 3D Printer Model' is (stl) file type, size is 2.1MB.
The file 'Elegoo Wash Station Mixer 3D Printer Model' is (stl) file type, size is 2.1MB.
Elegoo wash station is great but I need more than one tub to clean stuff and I did not find easy way to get a new tab with the mixer on the bottom so I created my own mixer.
Use any plastic tab that can sit on top of the elegoo washer
print 2 part of the mixer, glue them together
push 4 6mm plastic balls (soft air guns use them) into 4 holes
glue in 4 magnet disks, I used neodymium 3mm thick 20mm diameter magnets
before you glue in the magnets check for polarity, put the 4 magnets on the washer itself, the sides that are up need to be glued into the mixer
I added some hotmelt glue on the other side in corners to better grab the magnets
put the mixer into your plastic tab and enjoy :)
video of it in action: https://youtu.be/5FzdqRRfkTw
| Mixer_Part_1.stl | 85.4KB | |
| Mixer_Part_2.stl | 5.3MB |
