Elegoo Spool Drawer Organizer 3D Printer Model
The file 'Elegoo Spool Drawer Organizer 3D Printer Model' is (stl,step) file type, size is 615.71 KB.
The file 'Elegoo Spool Drawer Organizer 3D Printer Model' is (stl,step) file type, size is 615.71 KB.
Spool drawer parts bin for Elegoo filament spools with printable peg bolt and screw cap.
I will look at adding additional boxes and a spinner stand to this thing in the future.
Update 2024-03-16
I have uploaded the .step file for users who wish to make modifications.
I have uploaded a half height drawer for two drawers in one.
I have uploaded, working, but experimental, parts bins that fit in the drawers. These can be printed in vase mode. Please note that the parts bin that includes the thumb hole, when printing in vase mode, causes a few visual defects/anomalies due to it reversing direction. It does work though.
Test Print:
1: I would recommend printing the first 2 layers and then cancelling the print. You can use this thin piece to test for fitment and alignment around the spindle.
2: Not all the Elegoo spools are aligned top and bottom. This means the holes do not line up for the peg. You can first print a peg (or use an Allen Key) to check if the holes line up. If they don't then you will require drilling/punching out a hole that is lined up to the other one.
Note:
This has currently only been tested with the Elegoo Rapid PLA+ cardboard spools. I will soon have an empty Elegoo PLA+ spool for testing.
Spool Spindle Diameter: 89mm
Box Height: 56.8mm
Holes Pitch: 29.5mm
Holes Diameter: 5.1mm
Holes Inset from Edge: 11mm
| Bin-1x2.stl |
| Bin-1x4.stl |
| Bin-2x2.stl |
| Bin-2x4.stl |
| Bin-3x4.stl |
| Bin-4x4.stl |
| Elegoo_Spool_Drawer-1x2.stl |
| Elegoo_Spool_Drawer.step |
| Elegoo_Spool_Drawer.stl |
| Elegoo_Spool_Peg_Bolt.stl |
| Elegoo_Spool_Peg_Screw_Cap.stl |
