Elegoo Mars Heater 3D Printer Model
The file 'Elegoo Mars Heater 3D Printer Model' is (zip,STL) file type, size is 20.2MB.
The file 'Elegoo Mars Heater 3D Printer Model' is (zip,STL) file type, size is 20.2MB.
Note: Does not fit Mars Pro, only the standard Elegoo Mars
Print Settings:
Printer: Elegoo Mars
Rafts+Supports: Yes, Medium Density
Resolution: 0.04mm
Infill: Solid
Resin: Elegoo White ABS-Like Resin
COTS Components:
Heater:
NOTE: DISABLE HALF OF THE HEATER BY CUTTING ONE OF THE TWO CONNECTED WIRES (Do not cut the common wire)
https://www.amazon.com/Constant-Temperature-Electric-Heating-Incubator/dp/B07BJWJQLK/
Heater Power Supply:
https://www.amazon.com/gp/product/B07PWZQ33N/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Thermostat:
https://www.amazon.com/gp/product/B01J7VHS4I/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1
FFC:
NOTE: Use two ribbon cables if voltage drop is too high.
https://www.amazon.com/gp/product/B00W8WAICI/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
FFC Breakout:
https://www.amazon.com/gp/product/B07VHL9KDL/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1
| ELEGOO_HEATER.zip | 18.8MB | |
| FFC_Enclosure.STL | 192.5KB | |
| Heater_Mount.STL | 1.1MB | |
| MARS_PRO_REVISIONS.zip | 907.7KB | |
| Thermometer_Clip.STL | 45.0KB | |
| Thermostat_Bracket.STL | 64.9KB |
