Hi,
i build up the Bladeless fan and noticed that there is no case for the electronics.
I made a housing for it and glued it with hot glue on the backside of the housing.
I also added a main switch to the case.
If you don´t want a switch use the closed box, also for those who don´t want a Logo on the cover use the closed one ;)
You need 4x M3 Nuts and M3x16 screws. I heated up the nuts with a lighter and "glued" it in the box. After you glued the electric box on the housing drill a hole in it.
I had to soldering the wires of the speed controller, because they were to short.
I fixed the cable from the power adapter with a cable tie.
| Cover_Box.STL | 237.7KB | |
| Cover_Closed.STL | 124.3KB | |
| Electronic_Box_closed.STL | 500.9KB | |
| Electronic_Box_FANV2.STL | 508.1KB |
![[RaspRail] Optional Fanhole Cover 3D Printer Model](https://cdn.3axis.co/assets/be/f1/a8/99/bef1a899-bbdd-499b-9475-f43203ad0b0d/images/446c47cf-7d19-44d2-8b2e-29cf36a74068_thumb.jpg)
