Electronic Wolverine Claws 3D Printer Model
The file 'Electronic Wolverine Claws 3D Printer Model' is (stl) file type, size is 1.1MB.
The file 'Electronic Wolverine Claws 3D Printer Model' is (stl) file type, size is 1.1MB.
3D files to build Electronic Wolverine Claws. There are 12 parts total. Uses an Arduino Nano, a servo, and a switch. I used PLA for all of my parts, but other filaments may work just as well. Total printing time was about 21 hours and total filament usage was about 246g.
25% infill for all parts
auto-generated supports on all parts
210º C extruder (for PLA)
50º C heated bed (for PLA)
no rafts
YouTube Video: https://youtube.com/shorts/A-Q2NJdNv5Y?feature=share
Build Instructions: https://www.instructables.com/Electronic-Wolverine-Claws/
GitHub Repository (with CAD, Code, schematics, and more): https://github.com/printedgadgets/Electronic-Wolverine-Claws
| bottom_back_case.stl | 201.0KB | |
| bottom_case_connector_1.stl | 142.7KB | |
| bottom_case_connector_2.stl | 142.7KB | |
| bottom_front_case.stl | 237.0KB | |
| claws.stl | 42.1KB | |
| knuckle_1.stl | 809.0KB | |
| knuckle_2.stl | 809.0KB | |
| knuckle_3.stl | 809.0KB | |
| top_back_case.stl | 115.9KB | |
| top_case_connector.stl | 128.8KB | |
| top_front_case.stl | 150.3KB | |
| wrist_support.stl | 274.3KB |
