Electronic Component Stackable Drawers 3D Printer Model
The file 'Electronic Component Stackable Drawers 3D Printer Model' is (stl) file type, size is 1.9MB.
The file 'Electronic Component Stackable Drawers 3D Printer Model' is (stl) file type, size is 1.9MB.
Thanks Katraska for the original design.
Changes from original:
-Resized is to print on an Ender 3 (195mm wide)
-I changed the diamond pattern for solid walls whilst keeping the weight slightly less.
-I remade the drawers from scratch to bring down the print time and weight. Drawers are entirely 1mm thickness now for printing with a 0,4mm nozzle set to 0,5mm line width. The base of the drawer is 0.84mm thick for 3 layers at 0.28 (check your slicer doesn't print the first layer thinner as Cura does by default)
-Changed the handle to a custom one. Still prints without supports.
-Rounded the base's corners
-Made the Base's bottom thinner (and extended the locating pin holes to compensate)
-Added an optional fence around the top plate to store more stuff on top without loosing it down the back.
The drawers are 20mm deep (25mm-ish base) and 40mm deep (50mm-ish base)
0.4mm nozzle - Print at 0.28 later height with 0.5mm line width
0.8mm nozzle - Print at 0.4mm later height with 1.0mm line width
Base is about 70 grams each
Drawer is about 90 grams each
| Base_-_20mm_high_fixed.stl | 2.8MB | |
| Base_-_40mm_high.stl | 2.9MB | |
| Drawer_-_20mm_-_10_sections_with_label_spots.stl | 38.4KB | |
| Drawer_-_20mm_-_2_sections_divided_front_to_back.stl | 22.7KB | |
| Drawer_-_20mm_-_2_sections_divided_side_to_side.stl | 21.4KB | |
| Drawer_-_20mm_-_4_sections.stl | 23.7KB | |
| Drawer_-_20mm_-_5_sections_front_to_back.stl | 23.5KB | |
| Drawer_-_20mm_-_6_sections.stl | 28.2KB | |
| Drawer_-_20mm_-_6_sections_side_to_side_.stl | 26.3KB | |
| Drawer_-_20mm_-_9_sections.stl | 28.4KB | |
| Drawer_-_40mm_-_15_sections.stl | 34.7KB | |
| Drawer_-_40mm_-_2_Sections_divided_front_to_back.stl | 21.6KB | |
| Drawer_-_40mm_-_2_sections_divided_side_to_side.stl | 23.7KB | |
| Drawer_-_40mm_-_30_Sections.stl | 48.9KB | |
| Drawer_-_40mm_-_4_sections.stl | 24.1KB | |
| Drawer_-_40mm_-_4_Sections_Cross.stl | 26.4KB | |
| Drawer_-_40mm_-_5_sections_front_to_back.stl | 23.7KB | |
| Drawer_-_40mm_-_9_sections.stl | 28.3KB | |
| Drawer__-_40mm_-_6_sections_side_to_side_fixed.stl | 26.8KB | |
| Top_Plate_flat.stl | 102.1KB | |
| Top_Plate_with_fence.stl | 95.1KB |
