The file 'Electric Mountainboard 3D Printer Model' is (par,stp,stl,sldprt) file type, size is 1.4MB.
Make your MBS Atom 90 mountainboard fully electric!
This has been through many revisions to make it easy to just bolt everything on to the existing bolt holes on an Atom 90 mountainboard. Works like a champion! Would work even better with 2 motors and ESC's (1 for each rear wheel).
Let me know what you think!
https://www.youtube.com/watch?v=PecxJJL14kc&list=PLsCFjA1tOwXA20OKC3zw4jwajZJSEAKSG&index=1
See http://mrrocketman.com/blog/2014/01/27/electric-mountainboard-is-working/ for more details.
Added .par and .stp files
STLs are now repaired. Added left and right motor mounts.
Added Wheel Insert Inside For 54T Sprocket - courtesy of Mikko R!
| Motor_Mount.par | 750.0KB | |
| Motor_Mount.stp | 182.1KB | |
| Motor_Mount_Left.stl | 183.7KB | |
| Motor_Mount_Right.stl | 183.8KB | |
| Motor_Tensioning_Bracket.stl | 59.1KB | |
| Wheel_Insert_Inside.par | 466.0KB | |
| Wheel_Insert_Inside.stl | 265.5KB | |
| Wheel_Insert_Inside.stp | 238.3KB | |
| Wheel_Insert_Inside_For_54T_Sprocket.sldprt | 308.6KB | |
| Wheel_Insert_Inside_For_54T_Sprocket.stl | 176.0KB | |
| Wheel_Insert_Inside_For_54T_Sprocket.stp | 405.5KB | |
| Wheel_Insert_Outside.par | 392.0KB | |
| Wheel_Insert_Outside.stl | 236.5KB | |
| Wheel_Insert_Outside.stp | 124.3KB |
![Knifey [Toy Story] 3D Printer Model](https://cdn.3axis.co/assets/fb/32/6e/80/fb326e80-7e1a-4646-a4b9-22c62237b718/images/b45604ac-2887-4383-9a78-b2b3a2a2b28c_thumb.jpg)
