Electric Motorcycle 3D Printer Model
The file 'Electric Motorcycle 3D Printer Model' is (STL) file type, size is 6.5MB.
The file 'Electric Motorcycle 3D Printer Model' is (STL) file type, size is 6.5MB.
This is a model of an electric motorcycle which is suitable for 3D printing. The model is able to rotate its wheels and its front assembly which makes the bike turn from side to side. The rendering of all the parts, laid out, shows the position that the parts where designed to be printed. I don't own a printer but the parts should require minimum support structure.
Assembled Dimensions
(L) 166 mm x (W) 66 mm x (H) 92 mm
Total Parts: 35
Enjoy
| Body_Pegs.STL | 89.3KB | |
| Electric_Motor.STL | 2.2MB | |
| Foot_Peg.STL | 78.6KB | |
| Front_Fender.STL | 436.5KB | |
| Front_Tire.STL | 3.9MB | |
| Front_Wheel.STL | 492.9KB | |
| Front_Wheel_Peg.STL | 79.2KB | |
| Front_Wheel_Washer.STL | 106.8KB | |
| Handle_Bar.STL | 107.9KB | |
| Head_Light.STL | 948.9KB | |
| Left_Front_Body.STL | 351.2KB | |
| Left_Rear_Body.STL | 344.2KB | |
| Left_Shock.STL | 252.7KB | |
| Motorcycle_Frame.STL | 279.6KB | |
| Rear_Fender.STL | 506.1KB | |
| Rear_Tire.STL | 2.8MB | |
| Rear_Wheel.STL | 448.8KB | |
| Rear_Wheel_Peg.STL | 112.8KB | |
| Right_Front_Body.STL | 351.2KB | |
| Right_Rear_Body.STL | 337.3KB | |
| Right_Shock.STL | 252.8KB | |
| Seat.STL | 380.4KB | |
| Shock_Peg.STL | 91.7KB | |
| Side_Stand.STL | 48.8KB | |
| Swingarm.STL | 494.7KB | |
| Swingarm_Peg.STL | 88.2KB |
