Electric Fence Spacer 3D Printer Model
The file 'Electric Fence Spacer 3D Printer Model' is (3mf,stl,f3d) file type, size is 122.3KB.
The file 'Electric Fence Spacer 3D Printer Model' is (3mf,stl,f3d) file type, size is 122.3KB.
I put an electric fence around my wife's vegetable garden, to keep the ornery no good varmint critters out of it.
But they're clever. Too clever and too small for just a bunch of parallel wires. I use 6" wide strips of ½" wire mesh, alternating between high-voltage and ground strips. They can't jump through it or squeeze under it. They have to climb it, and there's little chance they can make it over without taking a hit. Eat our vegetables, will you? That oughta learn ya, ya stupid, good for nothin’ flea-bitten varmints.
Anyway, the mesh strips need a lot of firm encouragement to stay close to each other, but not touch. I made these spacer/insulators to solve the problem.
The spacer is attached firmly to each mesh strip with pieces of steel utility wire (don't short the two mesh strips together, of course…)
| ElectricFenceSpacer.3mf | 41.4KB | |
| ElectricFenceSpacer.stl | 6.9KB | |
| Electric_Fence_Spacer_v3.f3d | 81.2KB |
