Here is a holder i designed for the Elder Wand, not tried this with any other wand,
Printed in PLA at 0.1mm
I made them in 3 separate parts for ease of finishing and painting
The green stone i made from a 24mm cabochon resin mold painted with Vintage green gold
Part A printed with bed supports, part B no supports needed
Make sure Cura doesn't scale down the holder, should be 100%, you will need to rotate 45 degree for it to fit on a standard 200x200 bed<<<
| Wand_Holder_mkIII_PartA.stl | 1.7MB | |
| Wand_Holder_mkIII_PartB.stl | 4.1MB |
