“El Cheepo” DIY 3D Printer 3D Printer Model
The file '“El Cheepo” DIY 3D Printer 3D Printer Model' is (stl,step) file type, size is 2.7MB.
The file '“El Cheepo” DIY 3D Printer 3D Printer Model' is (stl,step) file type, size is 2.7MB.
An easy to build and Affordable 3D Printer assembly. Intended to be built with printed parts and standard 1in Sq Aluminum tubing available from most hardware stores. Original Sq tubing sourced from Home Depot.
https://www.homedepot.com/p/Everbilt-1-in-x-96-in-Aluminum-Square-Tube-with-1-20-in-Thick-802537/204273939
Suggest a Prusa Mk2 hotbed as the design will perfectly support that build dimension.
Aftermarket stepper kits are also available which fit perfectly. https://www.aliexpress.com/item/Reprap-Prusa-i3-MK2-MK2S-3d-printer-42-stepper-motor-320m-L-Z-Motor-with-Trapezoidal/32841178172.html
You may have better luck finding a stepper kit that is more affordable in your area or ones who's Z use couplers rather than direct connect Lead Screws.
Step File Included...
| Alternate_Z_Brace_Support.stl | 85.4KB | |
| Assembled.stl | 2.4MB | |
| Bottom_Brackets_Set.stl | 376.6KB | |
| Bottom_Left_Front_Bracket.stl | 94.2KB | |
| Bottom_Left_Rear_Bracket.stl | 94.2KB | |
| Bottom_Right_Front_Bracket.stl | 94.2KB | |
| Bottom_Right_Rear_Bracket.stl | 94.2KB | |
| El_Cheepo_v1.step | 1.1MB | |
| extruder-cover.stl | 615.3KB | |
| Extruder_Body_MK8.stl | 506.6KB | |
| Extruder_Idler_MK8.stl | 417.6KB | |
| fan-nozzle.stl | 104.0KB | |
| Front_Left_Y_Rod_Mount.stl | 144.5KB | |
| Front_Right_Y_Rod_Mount.stl | 143.9KB | |
| Front_Y_Idler_Bracket.stl | 155.9KB | |
| Left_Z_Brace_Rod_Support.stl | 151.4KB | |
| Left_Z_Motor_Mount.stl | 206.8KB | |
| Left_Z_Mount_Bracket.stl | 90.5KB | |
| Linear_Bearing_Brackets.stl | 1016.6KB | |
| Linear_Bearing_Brackets_16mm_OD_for_Igus.stl | 765.8KB | |
| Optional-Rear_Z_Bracket.stl | 55.4KB | |
| Rear_Left_Y_Rod_Mount.stl | 144.5KB | |
| Rear_Right_Y_Rod_Mount.stl | 143.9KB | |
| Rear_Y_Motor_Mount.stl | 231.6KB | |
| Right_Z_Brace_Rod_Support.stl | 151.4KB | |
| Right_Z_Motor_Mount.stl | 206.8KB | |
| Right_Z_Mount_Bracket.stl | 90.5KB | |
| x-carriage_R3.stl | 219.0KB | |
| x-end-idler_passthru-Slit.stl | 94.3KB | |
| x-end-motor.stl | 467.7KB | |
| Y_Belt_Mount.stl | 52.7KB | |
| Y_Rod_Mounts_Set.stl | 576.6KB | |
| Z_Brace_Rod_Support_Pair.stl | 302.6KB | |
| Z_Motor_Mount-Pair.stl | 413.6KB | |
| Z_Mount_Bracket_Pair.stl | 180.9KB |
