I had an Eken H9 camera that I wanted to mount to my CTC 3D printer so I could do time-lapse of prints. I couldn't find a mount for my camera so I set about making my own.
The case and the parts I made all work with the accessories that came with my Eken H9 camera. As they look like GoPro I assume they will work with these as well (this has not been tested with GoPro)
The only extra parts you will need are the screws. I only had 6mm screws to hand so I made the holes in the joints and bars 6mm. To screw the mounting bracket to the 3D printer frame you will need M3 3mm screws.
To set this up as I have done in the pics you will need to print the following:
1 x case
1 x 18mm bar
1 x 42mm bar
1 x mounting bracket
2 x 3x3 joint
| 18mm_bar.stl | 852.8KB | |
| 3x3_joint.stl | 1.3MB | |
| 42mm_bar.stl | 852.7KB | |
| Case.stl | 731.7KB | |
| mounting_bracket.stl | 1010.2KB |
