Eiffel Tower 300% (362mm Tall Combined) 3D Printer Model
The file 'Eiffel Tower 300% (362mm Tall Combined) 3D Printer Model' is (3mf,stl) file type, size is 10.3MB.
The file 'Eiffel Tower 300% (362mm Tall Combined) 3D Printer Model' is (3mf,stl) file type, size is 10.3MB.
Just printing now! I will upload the finished project when it is done in a couple of days.
Enjoy!
I split this into two pieces to make a larger model. The STL's labeled 300 are the two halves. They do not load in Cura at 300% size using the STL's, that is what I scaled them too after loading. The Cura profiles attached will load them in at the 300% scale
I decided to print these at very slow speeds to get the best quality I can out of the Ender 3 Pro with the few upgrades I have on the printer.
You will see the Cura models including my profiles are also loaded in. Use at your own desire. These settings work with the mods I have done.
The original STL with the whole tower is also attached
| EiffelTower_Bottom_300.3mf | 2.6MB | |
| EiffelTower_Bottom_300.stl | 25.4MB | |
| EiffelTower_fixed.stl | 7.0MB | |
| EiffelTower_Top_300.3mf | 1.0MB | |
| EiffelTower_Top_300.stl | 11.7MB |
