We printed an Eiffel Tower for our office. It took us 1600 hours to print this 100 pieces on two Ultimaker 2 and one Sharebot NG. The rest is history. For more information please visit http://dddtower.com
The 190 cm Eiffel Tower was on display at the Maker Faire Rome 2015 and the Mini Maker Faire Trieste 2016.
| 01_Shoes_4x.stl | 75.1KB | |
| 02_Feet_4x_print_upside_down.stl | 149.2KB | |
| 03_Legs_4x_print_upside_down.stl | 208.9KB | |
| 08_1st2_4x.stl | 72.5KB | |
| 09_1st3_4x.stl | 64.9KB | |
| 10_1st4_4x.stl | 72.1KB | |
| 11_2ndBridge_4x_print_upside_down.stl | 73.7KB | |
| 12_2ndSmallX_4x_print_upside_down.stl | 153.7KB | |
| 13_2ndfloor_4x_print_upside_down.stl | 319.2KB | |
| 14_2nd2_4x.stl | 395.9KB | |
| 15_2nd3_print_upside_down.stl | 301.3KB | |
| 16_2nd4_print_upside_down.stl | 281.3KB | |
| 17_2nd5_print_upside_down.stl | 250.1KB | |
| 18_2nd6_print_upside_down.stl | 242.3KB | |
| 19_2nd7_print_upside_down.stl | 234.8KB | |
| 20_2nd8_print_upside_down.stl | 166.5KB | |
| 21_2nd9_print_upside_down.stl | 151.6KB | |
| 22_2nd10_print_upside_down.stl | 151.4KB | |
| 23_2nd11_print_upside_down.stl | 134.0KB | |
| 24_2nd12_print_upside_down.stl | 114.2KB | |
| 25_2nd13_print_upside_down.stl | 126.7KB | |
| 26_2nd14_print_upside_down.stl | 133.6KB | |
| 27_2nd15_print_upside_down.stl | 114.1KB | |
| 28_2nd16_print_upside_down.stl | 124.7KB | |
| 29_2nd17_print_upside_down.stl | 128.3KB | |
| 30_2nd18_print_upside_down.stl | 132.9KB | |
| 31_2nd19_print_upside_down.stl | 175.7KB | |
| 32_smallxs1_print_upside_down.stl | 306.4KB | |
| 33_smallxs2_print_upside_down.stl | 324.5KB | |
| 34_3rd_print_upside_down.stl | 574.3KB | |
| 35_tipbase.stl | 67.3KB | |
| 36_tipplate.stl | 82.9KB | |
| 37_tiparms_print_upside_down.stl | 36.7KB | |
| 38_tip.stl | 333.3KB | |
| corners_Bridge_4x_print_upside_down.stl | 142.6KB | |
| cornertower_Rails_4x.stl | 24.6KB | |
| corner_Xs_06_1stfloor_4x_print_upside_down.stl | 965.1KB | |
| halfbridge_Bridge_4x_print_standing.stl | 179.3KB | |
| innerrailbuffer_8x.stl | 6.3KB | |
| innerrail_Rails_4x_print_upside_down.stl | 16.2KB | |
| middle_Xs_06_1stfloor_4x_print_upside_down.stl | 907.6KB | |
| mirrorbridge_Bridge_4x_print_standing.stl | 181.1KB | |
| outercorner_Rails_4x_print_upside_down.stl | 49.4KB | |
| outerrailcoupler_8x.stl | 2.2KB | |
| outerrail_Rails_4x_print_upside_down.stl | 411.4KB |
