Egon's Aura Video-Analyzer Helmet Used On Vinz Clortho Keymaster Of Gozer 3D Printer Model Free Download

Description Files (18)

Summary

2024-10-25 Please note the wire for the resistors in not 21 gauge, but 12 gauge or 2mm aluminum.

2021-07-06 Updated Wiring to include Missing Loop colour on 3F1

2020-10-12 Updated parts list and wiring list

This is my second version of this helmet, I designed all the parts included and added the ability to turn the 20 guage loose wires into somewhat of a ribbon cable.
Added a complete list of required parts and an assembly guide video.
The wire placement convention (star numbering etc) is explained in the video, and the system picture is included here. - The picture shows the star number and letter system from the inside. The inside runs clockwise, but remember if you look at it from the top (outside) side, the system is backwards and runs counter clockwise. (Anti-clockwise) I mention this because I struggled with it at first and made a few mistakes switching from inside to outside. :)

Part 1 Egon's Aura Video-Analyzer helmet build- Ghostbusters Used on Vinz Clortho Keymaster
https://www.youtube.com/watch?v=0mAlLdk5uZs

Part 2
https://www.youtube.com/watch?v=2eQL0YEX3FE
Part 3
https://www.youtube.com/watch?v=M4ZqCaROpG8

Need parts? https://www.etsy.com/ca/listing/882871077/ghostbusters-keymaster-interrogation?ref=shop_home_active_1

CAL-R_resistor.stl	2.9MB
chin_bottom.stl	63.5KB
chin_protec.stl	1.4MB
chin_top.stl	114.1KB
DALE_RH-50_centre.stl	530.2KB
DALE_RH-50_resistor.stl	4.4MB
SAGE_vinz.stl	597.9KB
vince_parts_listA.pdf	18.2KB
Vinz_ears.stl	693.4KB
Vinz_ears_clip.stl	2.1MB
vinz_insulator_1inch.stl	262.3KB
Vinz_insulator_2rib.stl	1.4MB
Vinz_insulator_6rib.stl	4.4MB
Vinz_insulator_6tall.stl	4.4MB
Vinz_wiringA.pdf	48.3KB
Vinz_wiringUpdate.pdf	47.8KB
wire_comb_22_wires.stl	392.3KB
wire_connector_22_wires6-32.stl	1.8MB

Egon's Aura Video-Analyzer Helmet Used On Vinz Clortho Keymaster Of Gozer 3D Printer Model

Summary

Tags

You might also like