Pegboard wall mount for Ego Power batteries. This is a remix, in which I have just added some pegboard mounts that attach after printing, which allows the large piece to be printed individually with little infill and in the orientation the designer planned for, and allows the pegs to be printed substantially stronger.
I left the original mount holes in case down the road you want to pop the pegs out and mount on a wall, board, etc. This fits perfectly in pegboard with 1/4 inch holes and 1 inch spacing.
Print 3 "pegs with hook" and one of each other file. In total you should print 5 items.
Print the pegs in whatever orientation you desire and with supports. The weight of the battery is held by so many points, that you don't need to be particularly worried about the weight in my experience. I printed with standard settings and PLA, everything is holding up well so far.
| Ego_Battery_Mount_For_Pegboard.stl | 260.8KB | |
| Pegs_Without_Hook_Ego_Battery_Mount.stl | 50.5KB | |
| Pegs_With_Hook_Ego_Battery_Mount.stl | 671.2KB |
