Eggcopter 3D Printer Model
The file 'Eggcopter 3D Printer Model' is (STL) file type, size is 1.1MB.
The file 'Eggcopter 3D Printer Model' is (STL) file type, size is 1.1MB.
The main idea of this design is not to reduce a fall speed, it's still high enough, but in distribution of the load on the egg in a certain direction when it hits a surface. The main task of the blades - is to ensure strict vertical falling and provide impact on the ground in the desired point of the container - along vertical axis of the egg. With radial load distribution on the egg-shell it can withstand tens of kilograms!
Drop-test #1: https://youtu.be/S5v99NG2HS0
Drop-test #2: https://youtu.be/uzMLbDz-Gms
| all_in_one.STL | 1.2MB | |
| all_in_one_flex.STL | 345.7KB | |
| arr_part12_4pcs.STL | 368.8KB | |
| arr_part1_4pcs.STL | 200.5KB | |
| arr_part2_4pcs.STL | 215.3KB | |
| arr_part4_1pcs.STL | 44.2KB | |
| arr_part5_1pcs.STL | 43.5KB | |
| arr_part8_1pcs.STL | 71.7KB | |
| big_part3_flex_1pcs.STL | 236.7KB | |
| big_part8_new_1pcs.STL | 64.4KB | |
| big_part9_0.2mm_5pcs.STL | 19.5KB | |
| big_part9_0.4mm_5pcs.STL | 19.5KB | |
| part10_flex_1pcs.STL | 74.8KB | |
| part11_flex_1pcs.STL | 84.2KB | |
| part12_4pcs.STL | 92.3KB | |
| part1_4pcs.STL | 44.3KB | |
| part2_4pcs.STL | 43.1KB | |
| part3_flex_1pcs.STL | 138.5KB | |
| part4_1pcs.STL | 40.4KB | |
| part5_1pcs.STL | 35.1KB | |
| part6_ver2_1pcs.STL | 117.1KB | |
| part7_1pcs.STL | 161.3KB | |
| part8_1pcs.STL | 64.2KB | |
| part9_5pcs.STL | 7.2KB |
