Eggbot_Remix_DJ 3D Printer Model
The file 'Eggbot_Remix_DJ 3D Printer Model' is (stl) file type, size is 40.8KB.
The file 'Eggbot_Remix_DJ 3D Printer Model' is (stl) file type, size is 40.8KB.
0000002.Case_Top-Remix_DJ.stl:
Removed Logo Mounting Holes. Provides smoother printing.
0000016.Hand_H-Remix_DJ.stl
Increased the width of the hinge tab to closely fit into the other part. Eliminates slop in hinge.
Also decreased the hole size to 1.9mm. Printed at 101.5% scale in ABS+. I then ran a #48 drill bit through the hole for a perfect fit on a 2mm X 20mm screw. The smaller screw provides less slop and less area for friction so the hinge works much better now.
0000017.Hand_V-Remix_DJ.stl
Same modification to the hinge hole as the previous part and printed the same way. Don't tighten the nut more than just snug. I used a small drop of lock tight on it but a lock nut would work as well.
| 0000002.Case_Top-Remix_DJ.stl | 92.9KB | |
| 0000016.Hand_H-Remix_DJ.stl | 38.8KB | |
| 0000017.Hand_V-Remix_DJ.stl | 56.8KB |
