EggBot Or Robot Easter Eggs 3D Printer Model
The file 'EggBot Or Robot Easter Eggs 3D Printer Model' is (stl) file type, size is 335.2KB.
The file 'EggBot Or Robot Easter Eggs 3D Printer Model' is (stl) file type, size is 335.2KB.
Based on http://egg-bot.com/
Thank you guys for the project
I used:
2 Nema17 stepper motor 17HS2408
1 Arduino UNO or NANO
2 Keyes stepper motor shield with drivers a4988 or CNC Shield V4
1 Servo SG90
The development of models was carried out taking into account printing without supporting material
You will need several M3 screws
One spring
3 M3 nuts
Hairpin and two nuts M5
Bearing 625zz
Aluminum rod 6mm, 2x120 mm + 2x200 mm or more
Threaded rod M5, length 70-80mm
Two screws for fastening the servo motor
This development makes it easy to adapt the machine to the right size
Up to 80mm in diameter
For better retention of the egg, use the suction cups
It can be children's toys or other
Testing:
https://www.youtube.com/watch?v=W_vneSnRW5A
Instructions on configuration and software you can find on the site
http://egg-bot.com/
I also recommend watching the video
https://www.youtube.com/watch?v=3zsbW9qmZk4
try to use a laser
https://youtu.be/cLeXpBuTBJ8
Refreshed parts from 26 March 2018
| Bearing_Cover.stl | 110.5KB | |
| Box_Intersecting_Rods.stl | 58.9KB | |
| CNC_V4_Holder.stl | 95.5KB | |
| CNC_V4_Holder_Part-1.stl | 51.9KB | |
| CNC_V4_Holder_Part-2.stl | 43.6KB | |
| Faucet.stl | 60.1KB | |
| Flag_mount.stl | 31.7KB | |
| Pen_ServoLeft_Holder.stl | 130.9KB | |
| Pen_ServoLeft_Holder_Part-1.stl | 74.3KB | |
| Pen_ServoLeft_Holder_Part-2.stl | 56.7KB | |
| Pen_Stepper_Holder.stl | 100.3KB | |
| Pen_Stepper_Holder_Foot.stl | 41.7KB | |
| Pen_Stepper_Holder_Nema23.stl | 82.9KB | |
| Rotational_Stepper_Holder.stl | 97.2KB | |
| Rotational_Stepper_Holder_Foot.stl | 35.0KB | |
| Tailstock_Holder.stl | 50.2KB |
