Another egg-timer hyper lapse turntable rig - this one can hold a mobile phone.
PhoneClip-Half part needs to be printed twice.
Shim part is 1 mm thick. If you need another thickness - rescale only in Z-axis. Or print 1 mm, 2 mm and 4 mm shims already.
If you don't have any action cam holder bolt, look into my other projects and pick the thumb screw - you can then put it on M5 30 mm hex head bolt.
| Base-bracket.step | 189.8KB | |
| Base-bracket.stl | 225.1KB | |
| Base.step | 1.8MB | |
| Base.stl | 1.6MB | |
| L-bracket.step | 102.9KB | |
| L-bracket.stl | 119.2KB | |
| PhoneClip-Half.step | 89.2KB | |
| PhoneClip-Half.stl | 135.9KB | |
| Shim-1mm.step | 23.2KB | |
| Shim-1mm.stl | 11.2KB |
