Egg Separator (Kitchen) 3D Printer Model
The file 'Egg Separator (Kitchen) 3D Printer Model' is (stl) file type, size is 10.3MB.
The file 'Egg Separator (Kitchen) 3D Printer Model' is (stl) file type, size is 10.3MB.
Simple Egg Separator that attaches to the side of your bowl. make sure you print it upside down.
!Note: V3 Wide is for thicker bowls up to 10mm
Ceramics
PLA without additives
PET, PETG / T-Glass
ULTEM 9085
Polypropylene
Natural grade Nylon 6 & 6.6 (without additives)
PEEK
ABS
PLA with additives → Ask your hub what PLA they use
Nylons with additives (e.g. oilon or Mos2)
Polycarbonate
High impact polystyrene (HIPS)
Other cool designs:
https://www.thingiverse.com/thing:2796949
https://www.thingiverse.com/thing:2750431
https://www.thingiverse.com/thing:2743111
https://www.thingiverse.com/thing:2760210
https://www.thingiverse.com/thing:2757762
https://www.thingiverse.com/thing:2775824
!Don't forget to CHECK OUT my other designs and FOLLOW my daily KooKoo uploads, Enjoy ;)
| EGG_SEPERATOR_V2.stl | 7.6MB | |
| EGG_SEPERATOR_V3.stl | 7.7MB | |
| EGG_SEPERATOR_V3_Wider.stl | 7.8MB | |
| egg_sep_with_supports_5mm_bowl.stl | 1.7MB |
