The file 'Egg Separator 3D Printer Model' is (stl) file type, size is 2.8 MB.
The Egg Separator... separates eggs. Many recipes require the egg yolk to be separated from the white but, for some people, this isn't an easy thing to do. This is a handy little solution that completely separates the yolk from the white and into two separate containers.
The Egg Separator differs from commercial products which are usually just one part. These products rely on the egg white passing through the base of the separator into a container below then moving the separator to another bowl to place the yolk into. The problem is the white often doesn't separate well from the yolk so additional intervention is required to complete the separation. In addition, when moving the separator from the bowl the white has run into to the second bowl the yolk is to be poured into, they are prone to dripping.
The Egg Separator has three parts (base receives the egg white, center separator section and the top which receives the yolk) and deals with the above issues well by following the following simple process:
It's easy... and, even for people who have no problems separating egg yolks from the white, it is a convenient solution because the yolk and white get separated into two containers that are part of the Egg Separator.
Is it food safe?
You be the judge on this point. Before use a post print check over is recommended to remove any loose fragments of filament then wash well in a sink with warm water and detergent. This has been used many times before posting with no known issues to date in this regard.
Please refer to the print instructions and images provided for additional information. And, post images of your Egg Separators in use for other members to see.
Note: Check out the rest of my fun and practical designs!
sep_base.stl |
sep_centre.stl |
sep_top.stl |