Egg Holder With Large Base 3D Printer Model
The file 'Egg Holder With Large Base 3D Printer Model' is (STL) file type, size is 294.6KB.
The file 'Egg Holder With Large Base 3D Printer Model' is (STL) file type, size is 294.6KB.
There is many egg holders there already, but I wanted one with large base so it can catch all the shells and be large enough and steady to not to tip.
The v1-30rouding will result with around 13cm base, while the v1 will be even bit larger. This is not small holder, if you need smaller holders there is plenty of other designs, this is for the ones who wants large one.
Base raises at straight edge so it should be easier to print and the footprint is rounded (noticed when I don't have any sharp corners on 1st layer it will stick to the bed much easier).
The first two photos are provided from the user Air Raid.
| egg-holder-v1-30rouding.STL | 433.8KB | |
| egg-holder-v1.STL | 404.9KB |
