EdRover – Raspberry Pi Home Surveillance Rover With Charging Station 3D Printer Model
The file 'EdRover – Raspberry Pi Home Surveillance Rover With Charging Station 3D Printer Model' is (stl) file type, size is 625.1KB.
The file 'EdRover – Raspberry Pi Home Surveillance Rover With Charging Station 3D Printer Model' is (stl) file type, size is 625.1KB.
Finally I can build a fully functional home surveillance rover with the below requirements,
Dimension - 15.5cm(W) x 14cm(L) x 7cm(H)
This build consist of 4 parts,
If you find this build too complicated for you, try the much simpler RC version below,
https://www.thingiverse.com/thing:3671892
Part 1 - Track
Head over to https://www.thingiverse.com/thing:3112734 and print everything, except Enclosure A, Enclosure B, base and MRTConnector
Part 2 - Software
a. Go to https://hackaday.io/project/25092-zerobot-raspberry-pi-zero-fpv-robot
Read about the software and wiring diagram
b. Download the PRO Version of the IMAGE file, so you can use it right away(just change your WIFI setting in the wplan file)
c. Get the necessary parts such as Raspberry Pi, Pi Camera, TP4056, ADS1115, LED and etc
d. Install the image onto your Raspberry SD card and try that it works so it makes you happy
e. About controlling over the internet/web for access from anywhere in the world, i got a VPN setup on my router which allow me to access the WIFI at home remotely. So far using OpenVPN profile works best surprisingly.
Part 3 - Assembling the tank
a. Print all my files, according to the suggested facing. I just print them all in 0.3 reso
b. Assemble as shown in the exploded view
Part 4 - Charging station
Charging station, go to this link
https://www.thingiverse.com/thing:3671931
Parts list,
M3 screws are mostly 5mm, 8mm, 10mm. must be countersunk screw
M2 screw on charging pads. must be cap screw. less than 5mm
Raspberry Pi 3 Model B+ with WIFI
https://www.banggood.com/Raspberry-Pi-3-Model-B-Mother-Board-With-BCM2837B0-Cortex-A53-ARMv8-1_4GHz-CPU-p-1278398.html?p=DG23031123036201501P
2x Arduino motor
https://www.banggood.com/DC-3V-6V-DC-1120-Gear-Motor-TT-Motor-for-Arduino-Smart-Car-Robot-DIY-p-1260117.html?p=DG23031123036201501P
TP4056 Charging board
https://www.banggood.com/TP4056-Micro-USB-5V-1A-Lithium-Battery-Charging-Module-Board-TE585-Lipo-Charger-p-1225993.html?p=DG23031123036201501P
18650 Li-Ion. Better get the protected one
https://www.banggood.com/1PCS-NCR-18650B-3_7V-3400mAh-Protected-Rechargeable-Lithium-Battery-p-90678.html?p=DG23031123036201501P
Donation credit,
| 18650_mount.stl | 90.3KB | |
| 2mm_spacer.stl | 97.0KB | |
| 3mm_spacer_board.stl | 90.9KB | |
| Base_ERC.stl | 326.4KB | |
| Camera_mount.stl | 182.5KB | |
| Camera_Mount_2.stl | 114.0KB | |
| Front_Cockpit_V2_ERC_B.stl | 346.2KB | |
| Light_Conductor_Short.stl | 19.4KB | |
| Rear_door_ERC.stl | 168.6KB | |
| Roof.stl | 373.7KB | |
| Upper_Mount_Big.stl | 134.8KB | |
| Wall_Left_ERC.stl | 257.8KB | |
| Wall_Right_ERC.stl | 257.8KB |
