This is V2 and V3 of my EDF afterburner for a 70mm EDF. version 2 can be printed in 2 pieces and coated with high-temperature mortar. Version 3 can be printed in 3 pieces both halves of the body and the exhaust mold for carbon fiber. NOTE - this is experimental and is not meant for more than 40% throttle on the EDF.
| V2_Main_body_full.stl | 462.3KB | |
| V2_Main_body_side.stl | 248.5KB | |
| V3_Full.stl | 1.2MB | |
| V3_mold.stl | 499.3KB | |
| V3_Side1.stl | 522.1KB | |
| V3_Side2.stl | 523.0KB |
