The original EDC container was nice but I had issues with the threads, and had to play with scale and clean up a bit. I also wanted to edit the files and add embossed text because I am using these to hold Tungsten on my welder and there are many kinds and sizes. So I created my own container basically just using the style from the original and same Tube OD so the original tube mount can be used.
I am waiting for magnets to show up so I can make a print in place to put a magnet in the bottom of the tube.
There are two cap styles for paracord or without.
I included my STEP and F3D files if you want to edit it for your needs.
You can add a 23mm ID O-ring to base of threads if you want it to be water tight.
I will add new files as I continue to modify my original design.
Hope you all enjoy and if you have any questions let me know
| EDC_Tube__Cap_v3.f3d | 1.3MB | |
| EDC_Tube__Cap_v3.step | 1006.0KB | |
| Tube_Body_v3.stl | 8.4MB | |
| Tube_Cap_No_Holes_V3.stl | 4.4MB | |
| Tube_Cap_With_Holes_v3.stl | 5.1MB | |
| Tube_Mount.stl | 1.5MB |
