Easy To Build Lithocube – 11cm Lithophane Box – Cube 3D Printer Model
The file 'Easy To Build Lithocube – 11cm Lithophane Box – Cube 3D Printer Model' is (stl) file type, size is 103.3KB.
The file 'Easy To Build Lithocube – 11cm Lithophane Box – Cube 3D Printer Model' is (stl) file type, size is 103.3KB.
This is my very easy to build Lithocube, especially made for SLA Printers like the Elegoo Mars but also works with FDM. Its designed to get around its size Limitations.
You will end up with a 110mm Cube. You only have to print 4 identical Mainparts and a Baseplate.
The Final Design uses a E14 Ikea Hemma Desk Lamp Stand for 5€ (B0713 Hemma) and some Ryet Led 200LM Lightbulbs (LED1715G3).
Just got rid of the original Rod and added a Ring for the Gap left on the Hemma Base. With that Baseplate you also could use is as a hanging Light.
Files of the first Design are still avaible:
LED Baseplate with a Hole for a common 12v DC Powerplug and a Tube to put a LED Stripe around. 50cm 3528 will be enough.
The Tube can fit those very small RF Dimmer Remote Things. You can build and use it any Orientation you want. If you need i also included a blank Plate.
Lithophanes made with https://lithophanemaker.com/
My Settings:
Frame Options: Frame Only
Lithophane Resolution: 0.1
Length: 93.5
Height: 93.5
Base Width: 3.5
Base Height: 4
Overhang Angle: 60
Maximum Thickness: 3
Minimum Thickness: 0.3
Goma & Peach Edition ☺
https://www.youtube.com/shorts/PTvu_r3o1dQ
I dedicate this to my beloved Cat Spike.He died on 30.November 2019 at the age of 17.
| lampe_ring.stl | 25.1KB | |
| Lithocube_blankplate_v1.0.stl | 684.0B | |
| Lithocube_e14_baseplate_v1.1.stl | 32.1KB | |
| Lithocube_ledbaseplate_v1.0.stl | 43.3KB | |
| Lithocube_ledtube_v1.0.stl | 51.6KB | |
| Lithocube_mainframe_v1.2.stl | 186.5KB | |
| support_v5.stl | 22.5KB | |
| support_v6.stl | 18.7KB |
