Easy Print 1:100 Leopard 2A6 3D Printer Model
The file 'Easy Print 1:100 Leopard 2A6 3D Printer Model' is (f3d,step,stl,3mf) file type, size is 22.8MB.
The file 'Easy Print 1:100 Leopard 2A6 3D Printer Model' is (f3d,step,stl,3mf) file type, size is 22.8MB.
Also available at: https://www.printables.com/model/481488-easy-print-1100-leopard-2a6
I split up m_bergman's Leopard 2A6 into multiple pieces for a cleaner print on FDM printers and made the gun movable.
Supplies:
SuperglueBlue Tape (optional)Printing Instructions:
Use 0.1mm layer height for best resultsUse the .3mf file with custom supports or use build plate supportsAssembly Instructions:
Remove all supportsUse Pin to help align the parts (optional)Glue Gun Top to Gun BottomSet the assembled gun into Turret Bottom Note: apply a small square of blue tape onto the hinges if they are too looseGlue Turret Top to Turret BottomCarefully glue Roof MG onto the post next to the loader's hatch (see exploded view)Glue Hull Top to Hull BottomGlue Track L and Track R to the hullInsert the turret into the hull| Easy_Print_Leopard_2A6_v7.f3d | 14.1MB | |
| Easy_Print_Leopard_2A6_v7.step | 9.4MB | |
| Gun_Bottom.stl | 1.1MB | |
| Gun_Top.stl | 1.6MB | |
| Hull_Bottom.stl | 1.1MB | |
| Hull_Top.stl | 9.8MB | |
| Leopard2A6.3mf | 1.9MB | |
| Leopard2A6.stl | 8.3MB | |
| Roof_MG.stl | 599.8KB | |
| Track_L.stl | 10.1MB | |
| Track_R.stl | 10.1MB | |
| Turret_Bottom.stl | 3.6MB | |
| Turret_Top.stl | 6.4MB |
