Easy Fruit Fly Bottle Cap Cup Attachment 3D Printer Model
The file 'Easy Fruit Fly Bottle Cap Cup Attachment 3D Printer Model' is (stl) file type, size is 379.3KB.
The file 'Easy Fruit Fly Bottle Cap Cup Attachment 3D Printer Model' is (stl) file type, size is 379.3KB.
Tired of the Fruit Fly Hassle?
Fed up with the tedious process of chilling fruit flies or accidentally freezing them solid? Introducing the Easy Fruit Fly Bottle Cap Cup Attachment.
How it Works:
Prep: Drill a 1.5-inch hole for larger 50mm caps or a 5/8-inch hole for smaller 24mm ones in an extra cup lid.
Assemble: Insert the Body piece A from the bottom, secure with the Nut (piece B), and screw on the Cap
Chill and Replace: For the final step, chill your fruit flies for 5 minutes and swap the old lid with your new lid and its convenient attachment.
Feed: Quickly tap the cap to knock down the flies, knock out your desired amount, then give the lid a few quick taps to knock the flies down again and replace the cap.
No more freezing, no more mess, just easy feeding.
I have given permission to these sellers to print and sell these
Dreamweavers Spiders https://www.dreamweaversspiders.com/
Creep Inn Family https://creepinnfamily.com/
| 24mm_Piece_A_-_Body.stl | 245.1KB | |
| 24mm_Piece_B_-_Nut.stl | 132.5KB | |
| 24mm_Piece_C-_Cap.stl | 119.0KB | |
| 50mm_Piece_A_-_Body.stl | 280.9KB | |
| 50mm_Piece_B_-_Nut.stl | 126.2KB | |
| 50mm_Piece_C-_Cap.stl | 126.9KB |
