When mounting the foil to board it can be tricky to put all the nuts in place. This part helps to align the nuts with the baseplate of the foil.
I designed the part for nuts from Gong Galaxy (the opening for the nut is 22x7mm)
print four of them.
put the nuts inside the printed parts
glue a rod of 149mm length in the side holes of the printed parts
(the first site can be glued before putting the nut in the fin box - the second should be glued in the fin box. I use hot glue for this - just put the glue in the hole, insert the nut in the box - put the rod in the hole with the soft glue. (You must be quick for this.)
| NutensteinGuide_v3.stl | 47.3KB |
