Easternest With Easter Bunny And Eggs 3D Printer Model
The file 'Easternest With Easter Bunny And Eggs 3D Printer Model' is (stl) file type, size is 12.5MB.
The file 'Easternest With Easter Bunny And Eggs 3D Printer Model' is (stl) file type, size is 12.5MB.
The Easter nest consists of several printing parts and can therefore be printed in a variety of colors. The set of nest, Easter bunny and six Easter eggs is designed to be plugged together.
The flat nest with the printable eggs also provides space for own eggs, such as e.g. Chocolate eggs.
This free 3D model by GRAVITYSHAPES.com is based on the “Swing Easter Eggs Crasher Set”. Some parts like the nest are also compatible with the swing set. For more printing tips and information (in English and German) about this EASTERNEST with Bunny and Eggs visit:
https://gravityshapes.com/design/ostereier-kracher-schaukel-und-osternest/
https://gravityshapes.com/en/produkt/osternest-mit-hase-und-eier/
Easy to print and assemble
Layer: 0.2 mm
Support required: No (optional)
Rafts: Yes (recommended for the eggs)
Sizes (assembled): Approx. 11 x 15 x 8 cm
Glue is optional, but is not required if the print results are good.
The sweet easter bunny is from Taurus82 (CC BY 3.0). Thanks.
| Osternest-Ei-1.stl | 2.0MB | |
| Osternest-Ei-2.stl | 2.0MB | |
| Osternest-Ei-3.stl | 2.0MB | |
| Osternest-Ei-4.stl | 1.7MB | |
| Osternest-Ei-5.stl | 2.1MB | |
| Osternest-Ei-6.stl | 2.1MB | |
| Osternest-Hase.stl | 3.9MB | |
| Osternest_Nest.stl | 9.7MB |
