This is a part of the Space Dice series of models, modified for terrestrial rolling (IE no holes for magnets). With good overhang control these should print well without supports, needing only a little bridging on the bottom. For a fair dice use the same number of top and bottom layers and try to make the walls as thick, and use minimal infill.
This listing is for the the 6th body type variation: Gears. Included are STLs for 4 numbering types: Arabic, Pips, Roman Numerals, and my own Intergalactic numbers system. See my listings for the other body variations: Prototype, SpaceDice, SpaceDice Plus, Diamond Joe, Corners, and Gears. You can find out more about the variations here: http://joes3dworkbench.blogspot.com/2017/01/3d-printed-space-dice-gone-wild.html
Choose your favorite or collect them all!
https://pinshape.com/items/31197-3d-printed-earthdice-variation-1-prototype
https://pinshape.com/items/31198-3d-printed-earthdice-variation-2-space-body
https://pinshape.com/items/31199-3d-printed-earthdice-variation-3-space-plus
https://pinshape.com/items/31201-3d-printed-earthdice-variation-4-diamond-joe
https://pinshape.com/items/31202-3d-printed-earthdice-variation-5-corners
https://pinshape.com/items/31203-3d-printed-earthdice-variation-6-gears
If you like my work I hope you'll consider supporting me on Pateron: https://www.patreon.com/3DPrintingProfessor
Subscribe to me on YouTube: https://www.youtube.com/user/mrjoesays
| EarthDice6_Arabic.stl | 355.4KB | |
| EarthDice6_Intergalactic.stl | 104.0KB | |
| EarthDice6_Pips.stl | 221.4KB | |
| EarthDice6_Roman.stl | 305.4KB |
