I couldn't find an earbud case design I liked so I created my own.
Print the sliding cover scaled at 99% if you don't like sanding.
You can attach the emblem on the cover with glue. "Hole_covers.stl" is not needed for using the case. It is only cosmetic.
UPDATE 8/9/19
Added a case with 1,6 mm walls instead of the original 2 mm: brings print time drastically down with 0,4mm nozzle.
| Earbud_case.stl | 666.4KB | |
| Earbud_case_16mm.stl | 801.5KB | |
| Earbud_case_cover.stl | 102.0KB | |
| Hole_covers.stl | 58.5KB |
![[smaler Air Gap Rmx] MicroSD & SD Adapter Card Wallet With Clip Lock 3D Printer Model](https://res.3axis.co/6f1b914a-dff7-4e2b-a31b-7cbf891492a3/images/198739ce-6fd6-491e-8cb2-26c9134304b9_thumb.jpg)
