There are several gauges on this site, but I have not seen a full set with all of the most common sizes. I created these based off of the dimensions of a purchased 22mm set I own so they are identical. These would be super easy to customize in your preferred software. If you need a size larger than 25mm / 1inch, let me know and I can create them.
Disclaimer I recommend these for fully healed ears only. I do not know if the materials you choose to print with are safe or non-toxic. Print and use at your own risk!
That being said, I have worn a pair for over a week now and have not had any issues.
Plug_10mm_00g.stl | 407.8KB | |
Plug_11mm_7-16in.stl | 407.8KB | |
Plug_12mm_1-2in.stl | 407.8KB | |
Plug_14mm_9-16in.stl | 407.8KB | |
Plug_16mm_5-8in.stl | 407.8KB | |
Plug_18mm_11-16in.stl | 407.8KB | |
Plug_19mm_3-4in.stl | 407.8KB | |
Plug_20mm_13-16in.stl | 407.8KB | |
Plug_22mm_7-8in.stl | 407.8KB | |
Plug_24mm_15-16in.stl | 407.8KB | |
Plug_25mm_1in.stl | 407.8KB | |
Plug_3mm_8g.stl | 407.8KB | |
Plug_4mm_6g.stl | 407.8KB | |
Plug_5mm_4g.stl | 407.8KB | |
Plug_6mm_2g.stl | 407.8KB | |
Plug_8mm_0g.stl | 407.8KB | |
Tunnel_10mm_00g_v1.stl | 554.5KB | |
Tunnel_11mm_7-16in_v1.stl | 556.7KB | |
Tunnel_12mm_1-2in_v1.stl | 541.8KB | |
Tunnel_14mm_9-16in_v1.stl | 536.1KB | |
Tunnel_16mm_5-8in_v1.stl | 538.1KB | |
Tunnel_18mm_11-16in_v1.stl | 540.6KB | |
Tunnel_19mm_3-4in_v1.stl | 540.8KB | |
Tunnel_20mm_13-16in_v1.stl | 542.2KB | |
Tunnel_22mm_7-8in_v1.stl | 542.6KB | |
Tunnel_24mm_15-16in_v1.stl | 543.7KB | |
Tunnel_25mm_1in_v1.stl | 543.9KB | |
Tunnel_3mm_8g_v1.stl | 530.5KB | |
Tunnel_4mm_6g_v1.stl | 542.6KB | |
Tunnel_5mm_4g_v1.stl | 548.2KB | |
Tunnel_6mm_2g_v1.stl | 557.0KB | |
Tunnel_8mm_0g_v1.stl | 547.2KB |