Eagle Transport Variant 3D Printer Model
The file 'Eagle Transport Variant 3D Printer Model' is (stl) file type, size is 5.0MB.
The file 'Eagle Transport Variant 3D Printer Model' is (stl) file type, size is 5.0MB.
Pandionidae Class : Eagle Variant Long Range Heavy Transporter.
My first attempt at designing something big in Tinkercad, so had a go at redesigning the Eagle.
At current size it's scaled to fit the Airfix Astronauts Figure set.
I've added channels for cables and 3mm Led's, although i haven't put any in, they do fit. (a little tight, but they go)
The Pods are designed for the Lighting to light up around the Attachable Science Pod, not made yet, as i'm currently working on a bettery box for in the middle, or you can just rotate them so the lights face forward.
I'm Currently still printing it off, but it's not looking too bad at the moment,
I've added a framed open pod which i'm using as i'm kind of making a hangar set for it.
Anyway have fun, if you fancy building it. Or updating it, remixing etc...
All can be jiggled about resized etc...
Any advice is always welcomed.
thanks for looking....
Spine Booster here
| BatteryBoxLower.stl | 252.3KB | |
| BatteryBoxUpper.stl | 236.6KB | |
| beak.stl | 172.4KB | |
| BeakBack.stl | 622.2KB | |
| BottomThruster_.stl | 132.2KB | |
| Cockpit170.stl | 124.7KB | |
| CockpitGreeble170.stl | 14.5KB | |
| Connector170.stl | 5.7KB | |
| EngineMount170.stl | 613.2KB | |
| Foot1701.stl | 238.8KB | |
| FuelCells170.2.stl | 5.4MB | |
| Hull170.stl | 245.2KB | |
| MainEngineAux2.stl | 132.2KB | |
| MainEngineNozzle.stl | 119.4KB | |
| MainiEngineAux1.stl | 132.2KB | |
| openpod1.stl | 2.3MB | |
| Pod170.stl | 521.5KB | |
| SideCage170.3.stl | 1002.0KB | |
| Spine130.stl | 496.4KB | |
| Spine150.stl | 556.6KB |
