this is a remake smaller than the previous model much efficient in terms of materials
Scaling the large model will compromise the details , this version is scaled and extruded
to match as much as possible the original model .
difference between the large model an the medium .
-Medium Top grid is now covering the entire chassis ( large model is sightly reduced)
-Cockpit plates extruded 2x
-Rear boosters plate removed to facilitate the building structure removal . ( two small windows added to remove the inside building structures ).
note the new version of booster is now added also on the original model link below :
http://www.thingiverse.com/thing:1950353
Eagle one Printable 2.0 Large size (Tested)
Print
grids must be printed with 100 infill
cockpit and Boosters must be placed in vertical and the connections must touch the print plate .
review the pillars some times the automatic script do not add pillars on the edges , add manually if missing.
| 80boosterv21.stl | 1.7MB | |
| 80_Cargo.stl | 369.8KB | |
| 80_cargocover.stl | 1.4KB | |
| 80_cockpit.stl | 6.9MB | |
| 80_grid.stl | 540.9KB | |
| 80_leftleg.stl | 239.0KB | |
| 80_Leg.stl | 15.2KB | |
| 80_lowerBooster.stl | 326.0KB | |
| 80_lowerbooster_updated.stl | 137.5KB | |
| 80_neck.stl | 270.8KB | |
| 80_rightleg.stl | 239.1KB | |
| Eagle_med_all.stl | 23.2MB | |
| eagle_med_and_large.pdf | 1001.0KB | |
| Front_t_fixed.stl | 46.4KB | |
| rear_t_fixed.stl | 47.8KB | |
| top_grid.stl | 489.5KB |
