This is a mini fpv mount for the E010: http://www.banggood.com/Eachine-E010-Mini-2_4G-4CH-6-Axis-Headless-Mode-RC-Quadcopter-RTF-p-1066972.html?rmmds=myorder
And the Eachine mini fpv set: http://www.banggood.com/Eachine-TX01-Super-Mini-AIO-5_8G-40CH-25MW-VTX-600TVL-14-Cmos-FPV-Transmitter-p-1088374.html?rmmds=myorder
All of these mini fpv sets are slightly different, so i made one to suit the one i got.
This has a 15deg tilt.
The hoop is a little bit of a loose fit, so you don't have to trim it to get it in, use a little glue to keep it in there.
The fpv unit is a little loose as well, use a little glue to keep it in there.
The 4 spacers give it clearance off the circuit board.
You will need to find another 2 tiny screws so you can have all 4 points secured.
| eachinebase.stl | 62.6KB | |
| eachinemount.123dx | 98.0KB | |
| eachinemount.stl | 175.7KB | |
| hoop.stl | 33.5KB | |
| spacers1mm.stl | 79.8KB |
![[FPV] Five33 Tiny Trainer V2 Mods 3D Printer Model](https://cdn.3axis.co/assets/34/8e/73/b5/348e73b5-6593-4c93-b490-dcc8e96305e3/images/d0fa51ee-5c43-40af-bf7c-2ded934af8b7_thumb.jpg)
