BN-880 GPS mount for my Eachine Cvatar. Very light weight. Printing in TPU is preferred, but PETG also works well on this design. PLA might also work, but I have not tried. Supports are needed due to the central overhang.
Hole Spacing for this mount is 27mm x 39mm with M2 screws. If your drone has the same hole spacing then you should be able to use this GPS mount as well.
V1.2: Forgot to add the hole for the GPS plug, is fixed now
| cvatar_gps_mount_v1.1.stl | 489.2KB | |
| eachine_cvatar_front_gps_mount_v1.2.stl | 518.1KB |
