E3Dv6 Shroud And 40 Mm Duct W/ Magnetic Coupler For 6x3mm Magnets 3D Printer Model
The file 'E3Dv6 Shroud And 40 Mm Duct W/ Magnetic Coupler For 6x3mm Magnets 3D Printer Model' is (stl,obj) file type, size is 2.9MB.
The file 'E3Dv6 Shroud And 40 Mm Duct W/ Magnetic Coupler For 6x3mm Magnets 3D Printer Model' is (stl,obj) file type, size is 2.9MB.
I've modded the original with right hand filament cooler so the magnets I've lying around from my R/C hobby will fit.
The magnets are 6mm round shims and 2.9mm thick
Here is a link to the magnets I've used and that fit really perfect:
http://www.banggood.com/100pcs-N50-Super-Strong-Disc-Magnets-6mm-x-3mm-Rare-Earth-Neodymium-Magnets-p-997163.html
However, I didn't reduce the diameter of the original magnet mounting holes, so 1/4" magnets will also fit well
By request I've added a version with a 7mm lowered mount called "30mm_wnn_exotic.stl"
and one with an 8mm lowered mount that I think should work with an E3Dv6 with "VOLCANO" heater.
I have a "VOLCANO" lying around but not installed, so let me know if it works well for you.
Added a part called: "for clearance adjustment", if you have trouble with the clearance of the joint just ungroup the parts, stretch the insert to the size you need , slip it in place and cut it out with the .stl editor of your choice.
The most ease to do that is the free 3D Builder from MS what comes with should come with your if you use win10.
| 30mm_wnn_exotic.stl | 705.0KB | |
| E3D_30mm_Duct_VOLCANO_.stl | 595.8KB | |
| E3D_30_mm_Duct_3mm.stl | 548.8KB | |
| E3D_40_mm_Duct_3mm.stl | 1.7MB | |
| for_clearance_adjustment.obj | 1.2MB | |
| for_clearance_adjustment.stl | 1.8MB |
