This is my Dual radial fan version based on Tech2C's awesome work
It helps a lot for people who have trouble with overhang on the opposite side of the blower fan, with tech2c's latest carriage.
Now I can print parts with large overhangs, with standard cura speeds (60mm/s).
I recommend using one or these to keep the heat block hot :
http://e3d-online.com/Socks-Launch
Just use 2x 50mm fans (from banggood)
Parts are easy to print without supports
you will need :
Cheers !
| duct.stl | 14.1KB | |
| duct_sym.stl | 14.1KB | |
| E3D_clamp.stl | 39.1KB |
