A bowden mount for the E3Dv6/light6 (and similar designs) with support for a proximity sensor. Screw spacing is 30mm and fits this carriage http://www.thingiverse.com/thing:889407
as well as all other standard 30mm carriages.
All the parts can be printed without support EXCEPT for the base of the 18mm one.
Offsets for the 18mm are X=36 and =-2.5
| 12mm_Base.stl | 130.1KB | |
| 12mm_Top.stl | 79.6KB | |
| 18mm_Base.stl | 134.3KB | |
| 18mm_Top.stl | 80.3KB |
