This is a remix of the excellent Thing N°547706 by Tech2C :
http://www.thingiverse.com/thing:547706
PLEASE TAKE NOTE :
There is a right and a left fan duct.
There are two versions of the carriage, one is for the prusa i3 Hephestos and the other is a more generic one, choose wisely.
/! This design will blow A LOT of air on your print, while this is great for bridging and overhangs, setting the fans to 100% might cause your prints to delaminate, if so, lower the fan speed.
Bill of materials :
1x E3D v6 hotend kit
2x 40mm fans
2x M3x16 screws
2x M3 nuts
2x M4x20 screws
2x M4 nuts
Basically this is it, I wish you an amazing day printing this out and upgrading your prusa !
| Bowden_carriage_clamp.stl | 251.8KB | |
| Bowden_carriage_E3D_V6_with_fans_mounts_V1.stl | 1.3MB | |
| Bowden_carriage_prusa_i3_Hephestos_E3D_V6_with_fan_mounts.stl | 999.3KB | |
| Fan_duct_40mm_V2_Left.STL | 331.9KB | |
| Fan_duct_40mm_V2_Right.stl | 331.9KB |
