THIS IS A SLIDE-ON COOLING FAN SHROUD FOR A V6 HOT END. IT IS A FRICTION-FIT SETUP.
THIS CAN BE KEPT SECURE WITH A ZIP TIE AS WELL.
NEEDS 6 SMALL SCREWS. THE HOLES ARE 2.75-3MM. ONLY NEED 2 SCREWS PER FAN. PLUS 2 TO SECURE THE SIDE LAYER FAN SHROUD TO THE SIDE.
| Parts_Cooler.stl | 1.7MB | |
| V6_40mm_Fan_shroud-With_Parts_Cooler.stl | 669.8KB |
